We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 diverse branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
High torque & High Velocity Rotation Twin-Screw Extruder:
Main Attributes:
*Total Gearbox from expert EPT maker, reduced noise, resilient longevity
*Higher screw velocity, substantial shearing, rapid discharge
*Independent lube oil cooling program layout
*Torque limiter to protect the push practice
*Suitable for reclaim powder, particular powder creation
*Break up layout of barrel and liner inserts for simple cleansing and maintainence
*Best & Side feeding alternatives
*Other features exact same as traditional kind extruder
Technological Parameters:
Design | Potential (kg/h) | Screw Diameter (mm) | Screw Size (mm) | Screw Velocity (r/min) | Primary Motor (kw) | Feeder Motor (kw) | Heating Power (kw) | Overall Proportions (mm) |
TSX-forty | eighty-260 | 40 | 16D | -800 | 11/15/18.5 | .fifty five | eight | 1850*seven hundred*1750 |
TSX-fifty two | one hundred fifty-450 | 52 | 16D | -800 | 22/30/37 | .75 | 10 | 2700*900*2200 |
TSX-65 | 400-one thousand | sixty five | 16D | -800 | forty five/fifty five/75 | one.one | 12 | 2900*a thousand*2400 |
TSX-75 | 800-1200 | 75 | 16D | -800 | 75/ninety | 1.5 | 16 | 3100*1200*2500 |
TSX-eighty five | 1200-1800 | eighty five | 16D | -800 | ninety/110 | two.two | 20 | 3700*1500*2900 |
Typical Type Co-Rotation Parallel Twin Screw Extruder
Characteristics:
*Strong shearing, effortless cleaning
*Exact car temperature control, substantial cooling & heating exchagne
*Hinged clamshell type barrel opening, segmented liners for effortless replacing and cost preserving
*Feeder straightforward assembly & disassembly, internal construction to steer clear of agglomeration
*Configurable screw applied for defferent powder formulas
*Screw and barrel adopt particular supplies like Cr12MoV, CPM, and so on., high donning resisting
*Very gearbox with reduced noise dB amount
*Tomechanical torque-restricting products rely on springs (with specific adverse fee traits) that work in unison with a torque transmission method of balls interfacing two indents. In this setup, preset torque is held inside an appropriate setting tolerance and assures that even underneath extremely dynamic travel circumstances, the clutch disengages for the duration of overload.rque limiter to shield the drive train
*Reduced strength intake
Technological Parameters:
Model | Capacity (kg/h) | Screw Diameter (mm) | Screw Duration | Screw Pace (r/min) | Principal Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | All round Proportions (mm) |
SLJ-40 | eighty-220 | forty | 16D | -500 | eleven/fifteen/eighteen.five | .fifty five | 4 | 1800*600*1700 |
SLJ-50 | a hundred and fifty-three hundred | 50 | 16D | -500 | 22/thirty | .75 | 8 | 2600*seven hundred*2000 |
SLJ-fifty five | 300-400 | 55 | 16D | -500 | thirty/37 | .seventy five | eight | 2700*900*2300 |
SLJ-sixty | 400-600 | 60 | 16D | -five hundred | forty five | one.1 | twelve | 2750*a thousand*2350 |
SLJ-seventy five | 600-800 | seventy five | 16D | -five hundred | fifty five | 1.5 | twelve | 2900*1100*2400 |
SLJ-80 | 800-1200 | 80 | 16D | -five hundred | seventy five/ninety | 2.two | twenty | 3700*800*2800 |
Technical Parameters (Lab Kind):
Design | Potential (kg/h) | Screw Diameter (mm) | Screw Length | Screw Speed (r/min) | Major Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | All round Proportions (mm) |
TSX-twenty | .2-ten | 22 | 16D | -600 | 2.2-4 | .one | 2 | 1600*300*850 |
SLJ-thirty | one-thirty | thirty | 16D | -five hundred | 3-5.five | .18 | 3.2 | 1430*550*1300 |
SLJ-32 | forty-eighty | 32 | 16D | -five hundred | seven.5/11 | .twenty five | 3.2 | 1600*five hundred*1500 |
Business:
Xihu (West Lake) Dis.sunlight is a foremost manufacturer in China of Powder Coating Manufacturing Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 many years of experiences in this ept and have exported to practically 30 international locations and regions in the earlier 10 years, and acquire widely great reputations.
We handed CE certification approval and ATEX explosion resistant examination, etc. worldwide requirements, we do know how to meet up with the diversified and personalized made requests of our consumers.
Our eternal organization philosophy: consistant top quality, efficient communication, responsible services.
The use of original gear manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the shown replacement parts contained herein are not sponsored, authorized, or manufactured by the OEM.