The Taper Mount Direct Thread Adaptor provides a direct thread interface for taper mounted suppressors. Two units of wrench flats generate it equally easy to attach or take away from the suppressor or your firearm’s muzzle threads. No proprietary tools necessary. Available in 1/2×28 and 5/8×24 with 18x1mm support just around the corner. While it is convenient to have direct thread suppressor capability that can move from sponsor to host without the need for further muzzle products, it is necessary to remember that each host firearm must be checked for baffle alignment via visual Taper Adapter china inspection before firing.
The 1/2×28 Insert works extremely well with cartriges up to 30 caliber and the 5/8×24 can be utilized up to .338 caliber.
The use of immediate thread adaptors improves on direct thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Attach Suppressor to Rule ALL OF THEM.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for each and every contingency
Taper Mount Repeatability and Stability
Multi-Thread versatility for your Taper Attach Suppressor
taper adapters allow the use of holders or tools with a different machine-side taper then the equipment spindle taper, such as using a BT40 tapping chuck on a 50-taper spindle.
These adapters get rid of lead time losses in case of a equipment breakdown. Adapters may also help in testing custom tools on another machine than the planned production machine.
Taper adapters avoid the necessity for a supply of new holders or equipment for a specific machine. They arrive prepared to apply with built-in locked clamping mechanisms having a clamping screw on a ball bearing for steep taper clamping or HSK locking device for taper clamping.
The steep taper may be the standardised form of an instrument taper 
for clamping tools in the key spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (in contrast with the Morse taper), thereby making tool improvements easier without clamping. This is particularly significant for automatic tool changes
Little clamping travel equals brief clamping time
High torsional rigidity as a result of short distance between the cutting edge and spindle bearing (short overall length)
For adapting morse taper equipment to milling devices that take R8 tools
Alloy steel hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Tools More taper lowering sleeve is used to convert your headstock by #2 MT to #1 MT. That is useful for those who have a drive centre or pen mandrel which is normally 1MT as well as your headstock is 2MT