Our direct supply chain to Martin Sprockets factories gets a wider range of QD Bushings delivered at the proper time at the right price.
Taper bushing are widely used together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are constructed with high quality engineered materials with great tolerance. The feature is certainly easy to make use of and needs no extra alteration. These bushings can suit almost all sorts of assemblies and sizes. They are the best choice in design for mechanical connections.
No costly re-boring: complete selection of both metric and imperial obtainable.
Standard range suits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete short reach range offered, for compact light-weight assemblies & Clean, Compact Design.
Simple installation and removal.
Our direct supply chain to Martin Sprockets factories gets a wider selection of QD Bushings delivered at the proper time at the right price.
Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered components with great tolerance. The feature is easy to make use of and needs no extra alteration. These bushings can suit almost all sorts of assemblies and sizes. They are the best choice in style for mechanical connections.
No costly re-boring: full range of both metric and imperial obtainable.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete short reach range available, for compact light-weight assemblies & Clean, Compact Style.
Ease of installation and removal.
The initial sheave and pulley mounting program developed to facilitate installation and substitute of components.
The QD (Quick Detachable) design offers both conventional (flange outboard) and reverse (flange inboard) mounting configurations.
1. Be sure the tapered cone surfaces of the bushing and the within of the driven item are clean and free from anti-seize lubricants.
2. Slide QD bushing on shaft, flange end first. Assemble key.
3. Position QD bushing on shaft. Tighten arranged screw over key “hand tight” with standard Allen wrench only. Usually do not use excessive force.
4. Slide huge end of sheave or sprocket taper bore into position over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
Take note: Install M thru S bushings in the hub to ensure that both extra holes in the hub are located as far as possible from the bushing’s saw cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque table on back. Usually do not make use of extensions on wrench handles. There must be a gap between your face of the sheave or sprocket hub and the flange of the QD bushing to insure a satisfactory cone hold and press fit.
CAUTION: THIS GAP MUST NOT BE CLOSED.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power tranny applications. Flanged quick-disconnect bushings feature a completely split design to greatly help provide easy set up and disassembly. A tapered bushing with straight edges uses an interior screw to greatly help drive the bushing into the shaft, while a split taper includes a flange and a key on the bushing to greatly help provide more drive.
QD bushings (inch and metric sizes) possess a flanged design and feature a 4° taper with conventional or reverse installation. They are stocked in popular completed bore sizes and minimum plain bore for customized reboring.
Many people make reference to both types as a “taper lock” because they both utilize the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, runs on the set screw to drive the bushing into the bore of the component becoming set up (sheave, sprocket, etc.). Be cautious when installing these screws. The holes with threads on the bushing are for removal only. Also remember that the looks of a flange on the outside of the bushing doesn’t indicate it’s a QD design. Split Taper bushing also has a flange, and both are not interchangeable. The QD style has a split that continues through the flange. The Steel QD (Quick Disconnect) Type bushing offers flexible and easy installation while providing exceptional holding power. QD Bushings are utilized thought out the industry offering convenience and design versatility. They are precision machined of quality Steel and are installed by tightening several cap screws. This draws the bushing in to the taper bore of the product which compresses the bore of the bushing. QD bushings are often removed utilizing the cap screws as jack-screws. Dual drilled holes are furnished in QD Bushings permitting mounting of product in the traditional or reverse positions. This allows cap screws to become installed through item hub or bushing flange whichever is definitely most convenient. A significant benefit in installation, cap screws are usually inserted from the exterior where they are often accessible. QD Bushings are available from share with all popular bores within the number of each size bushing.
QD Bushings feature a split tapered flange with the split central to the flange and taper. They are applied to sprockets, sheaves, and pulleys where more clamping push is required over standard bored-to-size bushings. Quick-Disconnect Bushings are essential for installation v-belt drives, synchronous belt drives and roller chain drives.