Single and dual reduction planetary gear drives to be utilized with electric, hydraulic, atmosphere motors or mechanical power input from high quickness, low Plastic Gear Rack torque sources to provide reduced speeds at increased torques. The input aspect has regular SAE pads for motor mounting. Available in the three result configurations shown below. Many units could be furnished with an intrinsic parking brake.
Single reduction drives are limited to 
3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input rate is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Units provide 95% power transmitting efficiency.
Wheel Drive
Input side has regular SAE pads and splined input. Output aspect has hub for installation automobile wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is certainly regular on all wheel drives.
Shaft Output
Input side standard SAE pads with splined insight. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined input. Output side includes a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring gear to minimize backlash growth due to wear. The exterior bearing nut provides the best in shaft retention and shaft strength. Output could be a spindle shaft or different sizes of integral pinion gears.