The EP Greenhouse gear motor is a compact and lightweight reduction reducer with a built-in limit switch system that’s ideal for assembly of a locally available electric electric motor. The reducer is utilized in manually-managed or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP gearbox is certainly rainproof and windproof. The gear driver includes a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft can be locked when the decrease geared motor is not running. The completely sealed reduction gear driver comes with an expansion chamber with a diaphragm to keep carefully the gear oil at a low pressure under all situations, even at high temps. Thanks to the use of an growth chamber, the reducer can be installed in any placement. There are no limitations, since there is no need for a bleed plug. The sealed reduction gear reducer keeps the apparatus oil of the gear motor in optimal condition for its entire operating life time. The geared motor is suitable for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction reducer has an FT85 motor assembly flange, on to which the right IEC standard motor can simply be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed in an integrated chamber and is usually enclosed by an impact-resistant plastic cover. The limit switch system is obtainable and simple to adjust. The limit change system’s optimum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The geared motor has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of software of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).