electric fan motor

Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric engine, capacitor and quickness control change is still hooked up electric fan motor china nevertheless the cord itself is normally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “Program Notice” below for utilize in a variety of other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” long with a collection screw easy. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you possess a pull-chain). In the event that you order several motor at a time, we will do our better to supply your order with each one sort of control or the excess.
Application Note: Do NOT use this electric electric motor in a nonfan application. This is a completely enclosed fan electric motor and designed to have constant ventilation over the motor casing for cooling. The housing isn’t vented and the electrical engine will overheat and enter automatic thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools cool off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the motor and lead it to proceed into automated thermal overload. (Your lover blade from another producer may possess a steeper blade position.)
Origin: This electric electric motor is manufactured in China.