Cycloidal pinwheel reducer is certainly a up-dated of new type transmissing machine designed with K-H-V less teeth engagement and the cycloidal pin wheel clenching system, which are widely used in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Oil and chemical cranes, Industry, job machinery etc and conveyors. various fields.
Features:
1. Equipment is made of high power low carbon alloy steel by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is followed for all with high accuracy, gears and good contact performance
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service lifestyle and high bearing capacity;
5. convenient to assemble, check and disassemble.
Operation specifications and precautions
1.High modularization design: many equip with various engine or other power type conveniently.Same machine type may equip with numerous power motor. It is easy to recognize the combination and
junction between every equipment type.
2.Transmission ratio: good division, wide scope. The combined equipment type may form very large transmission ratio, i.e. end result suprisingly low rotary speed.
3.Form of assembly: the position to be installed is not limited.
4.High strength, compact: the box body is made of large strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and good grinding process, which means bearing capability of unitvolume is great.
5.Long life: Beneath the condition of correct type chosen (including choosing ideal operation parameters)normal operation and maintenance, the life span of main elements of speed reducer (except wearing parts) should not be significantly less than 20000 hours. The wearing parts include lubricating essential oil seal, essential oil and bearing.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is normally low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High swiftness ratio and efficiency
Single stage transmission may reach to at least one 1:87 of speed-straight down ratio and the efficiency is definitely a lot more than 90%. If use multi-speed travel the speed-down ratio is definitely bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and productivity shaft are in same axis center, it is compact.
3. Smooth and steady run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be obtained.The structure is easy, but it can recognize high reduction ratio machine.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are involved simultaneously, and there are two gears engaged with 180 degree symmetry. Accordingly, the influence of tooth pitch error and cumulative tooth pitch mistake on the rotation precision is relatively average, making the position precision and rotation accuracy reach a very high level.
4. Less parts, convenient installation
The three basic pieces achieve a higher deceleration ratio, and they are all on a single axis, so the kit is simple to install and simple to shape.
5. Small in size and light in weight
Compared with the previous gear device, the volume is 1/3, the pounds is 1/2, but can buy the same torque capacity and reduction ratio, achieving small lightweight.
6 High torque capacity
Flexible wheel material USES distinctive steel with excessive fatigue strength.Different from ordinary transmission gadget, the quantity of teeth meshing accounts for in regards to 30% of the full total number of teeth. In addition, it is in call with the surface, in order that the pressure borne by each equipment is reduced and huge torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss caused by friction. Therefore, high lowering ratio may be accomplished while maintaining high efficiency, and miniaturization of generating motor could be realized.
8. Low noise
The apparatus meshing cycle velocity is low, the transmission activity force balance, therefore the operation is quiet, and the vibration is quite small.
◆Great speed ratio and high efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will come to be larger.
◆Because planetary transmission basic principle is adopted, the type shaft and outcome shaft are on the same axis line, to ensure that the machine style can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts makes the vibration and voice limited by a minimum.
◆Reliable use and prolonged service life because the key parts are constructed of great carbon chromium steel, high strength is obtained by quenching (HRC58-62), and rolling friction is utilized in some transmission contacts, so the service life is extended.
Cycloid reducer is definitely a cycloid needle teeth meshing planetary transmission principle drive models, is a great transmission has various advantages, versatile, and will be both positive and negative operation.
•Big ratio, and substantial efficiency Smooth operation,
• low noise The usage of reliable,
• long life can reach 50000 hours
• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),
• operation and contact with rolling friction, basically zero wear, durable.
• Compact structure,
• small size Because the utilization of a planetary transmitting, the source shaft and the outcome shaft on the same axis, which makes the model to obtain the smallest possible size.
• Reasonable design, easy maintenance, and break down easily install,
• minimal number of parts and straightforward lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall world pinion improve the output strength, precision and carrier.
(2).Hoop clamp coupling have five connection techniques ideal for different application environments.
(3).Size above PL/PF120(including)precision and high power integral inner gear housing, processed in one station,which get rid 
of the cumulative mistake and assembling error of split type.Get rid of casting process;adopt incredibly hot of forging process, that will reduce the blank material defects.
(4).The meshing equipment adopt shaving method after carburizing and quenching,which easier to make gear area smooth and high precision,decrease the temperature rising due to gear surface area gluing and friction.
This series worm-gear reducer was designed after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its efficiency and mounting dime nsions conform the same types of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, compact structure, beautiful shape, low noise and radiate heat efficiently.
Good sealing and adaptability.Its blend with T gear reducer and MB/MBN variator may meet all sorts of speed requirement.