We – EPG Team the largest Chain and agricultural gearbox factory in China with 5 diverse branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
In 2008, it was awarded with “National Export Commodity Inspection-cost-free Company”. With Our product range also covers locking assemblies (clamping elements/locking system), taper bushes, QD bushes, bolt-on hubs, pto shaft, agricultural gearboxes,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, common joint, rod ends and yokes. above 30 years of blended knowledge in Bearings and Power Transmission, EPG is entirely able of planning and creating merchandise to match your certain software. Our experienced personnel of engineers and consumer provider representatives look ahead to supplying you with any We appear ahead to the opportunity to provide you and hope to incorporate you to our increasing family members of satisfied buyers.
INTRODUCTION
Offset Url Chain for Sugar Business
The offset url chain is made with large abrasion, influence, and corrosion resistance to meet up with the software needs in sugar creating sector. Its side plates are bended but with paralleled ends. Each scorching bending and cold bending strategies can be used for facet plate processing. The adoption of innovative bending die, coupled with increased quality inspection, helps make certain the bending of side plates comes with out cracks. Consequently, the offset sidebar chain will not break easily below large load circumstances.
Produced utilizing stainless steel and alloy steel supplies, our offset hyperlink chain for sugar sector provides least tensile strength alternatives in between 250 and 900KN, and rated working load options from18 to 85KN.
DC 2184 DC 8184 DC C2614 DC 09063 all avaliable
| Chain No. | Pitch P (mm) | Inner width of slim conclude b1 (min.) (mm) | Outer diameter of roller (bushing) D (max.) (mm) | Pin | Sidebar | Min. tensile power Q (min) (KN) | Rated doing work load (KN) | Weight for each meter q (kg/m) | |||
| d (mm) | L1 (mm) | L2 (mm) | h (mm) | T (mm) | |||||||
| *#SS100D | a hundred | 33.27 | 33.27 | seventeen.27 | 38.4 | forty eight.six | 44.5 | 8 | two hundred | 17.8 | ten.47 |
| DC 1125 | one hundred and one.six | 32.six | 50.8 | seventeen.five | 37.9 | forty five | 50.eight | 7.9 | 210 | eighteen.26 | |
| *DC D2184 | 152.four | 34.nine | 76.2 | 22.23 | forty three.9 | fifty one.2 | 50.eight | 9.5 | 355.six | 31.six | seventeen.7 |
| DC W1796 | 152.four | 37.8 | 69.eighty five | 22.23 | forty four.two | 52.nine | 57.two | 9.five | 444.5 | 31.six | eighteen.fifty nine |
| DC 09063 | 152.four | 38 | 76.2 | 23.83 | 47.one | fifty four.nine | 60.3 | ten.3 | 622.3 | 36.one | 21.eighty three |
| DC 8184 | 203.2 | forty five.nine | 88.9 | twenty five.4 | fifty nine.seven | sixty five.8 | sixty nine.nine | twelve.seven | 742.four | forty seven.6 | 29.two |
| DC C2614 | 304.eight | 69.85 | 63.five | 31.seventy five | seventy eight.5 | 84.five | 88.nine | fifteen.nine | one thousand | 84.5 | 33.sixty eight |
Solution SHOW
The use of unique gear manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our firm and the listed substitution elements contained herein are not sponsored, accepted, or manufactured by the OEM.
