We – EPG Team the greatest gearbox & motors , couplings and gears manufacturing unit in China with 5 various branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828
Solution attribute:
one. Stator measurement is optional
2. Protected, trustworthy, lower noise, great commencing, lengthy lifestyle
3. Robust power
Rated voltage a hundred and ten~120V/220~240V-50/60Hz
Common employed:
Cross blower motors use on typically Heater, Air cooling Fan and so forth
Frequency: fifty-60Hz
Present: .1A
Electrical power: 15W
Velocity: 2300RPM
Torque: 6.7mN. M
Insulation class is optional from E, B, F H in accordance to person necessity
| Model | STATOR Measurement | SHAFT DIA | VOLT | Enter Power | TORQUE (g.cm) | Speed RATED |
| YJ5812B | 12mm | 4mm | one hundred ten-240V | 10W | 6.71mN.m | 3000RPM |
| YJ5816B | 16mm | 4mm | one hundred ten-240V | 13W | six.85mN.m | 3000RPM |
| YJ5820C | 20mm | 5mm | 110-240V | 15W | eight.89mN.m | 3400RPM |
| YJ5830B | 30mm | 4mm | one hundred ten-240V | 50W | 12.9mN.m | 3400RPM |
ABOUT US
Ritscher group was set up in 2006. We always target on micro-motors for home and industrial electrical equipment. Presently, we have expert micro-motor factories separatlly positioned in ZheJiang & ZHangZhoug province. It has fifty,000 square meters vegetation and far more than five hundred workers, yearly output is 5 million pcs and has 10 million pcs yearly creating capacity. Soon after a long time improvement, we created a excellent status in the domestic and oversea market place and have the believe in from our international clients.
We started our organization from shaded pole motors, right after 10 many years development, our merchandise is enlarged to BLDC motors, capacitor motors, synchronous motors, stepping motors, servo motors, and PMDC motors. Our merchandise are broadly utilized for generating refrigerators, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, massage machines and several other equipments.
To style the lastest technological innovation motors and fulfill our clients requirments, we have the very able R&D team, to make sure our products quality, we have quite stringent control method for our generation section & QC department, to make our value decrease, we have the really skilled acquire division, We dedicate to make each details far better than we could do.
To offer quick and better service to our customers in Australia and New Zeland, we set up branch office in Australia given that 2017 with exprienced specialist to assist the company, which will deliver far more customers to get know of us.
We will preserve carrying out our occupation, transfer ahead step by phase to make our organization spot wider and brighter.
Just take ritscher ,get pleasure from modern day existence!
Our organization FAQ for you
(1) Q: What kind motors you can provide?
A:For now,we primarily give Kitchen Hood Motor,DC Motor,Equipment Motor,Supporter Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.
(2) Q: Is it achievable to check out your manufacturing facility
A: Positive. But you should kindly hold us posted a number of times in progress. We want to examine our
routine to see if we are accessible then.
(3) Q: Can I get some samples
A: It depends. If only a number of samples for private use or substitute, I am concerned it will
be tough for us to give, due to the fact all of our motors are personalized produced and no inventory
obtainable if there is no even more requirements. If just sample testing before the official purchase and
our MOQ, price and other terms are suitable, we’d adore to supply samples.
(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is among one thousand~10,000pcs for different types soon after sample acceptance.
But it really is also okay for us to accept more compact tons like a few dozens, hundreds or countless numbers
For the preliminary 3 orders following sample acceptance.For samples, there is no MOQ necessity. But the less the far better (like no more than 5pcs) on issue that the quantity is ample in circumstance any adjustments essential following original screening.
The use of unique equipment manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the detailed substitute parts contained herein are not sponsored, accredited, or created by the OEM.
